IMW 5.3 Parameters for ESU LP Installation Flow

• Direct Connection - the ESU Launchpad laptop is connected to the server via a flat switch
• Network Installation - the ESU Launchpad laptop is connected to the server via a default gateway within your network

Modify these parameters only if you set the network setup type to Direct Connection.

The IP address used for communication between the ESU Launchpad Windows virtual machine and ESXi during the installation. It must be in the same subnet as the ESXi IP address.

If you use the same laptop to connect to ESXi or iLO, ensure that the Launchpad Windows IP for communication with ESXi is not the same as the IP configured for communication with ESXI or iLO on a laptop interface.

The IP address of the ESU Launchpad Windows virtual machine used for communication with iLO. It must be in the same subnet as the iLO IP address.

If you use the same laptop to connect to ESXi or iLO, ensure that the Launchpad Windows IP for communication with ESXi is not the same as the IP configured for communication with ESXI or iLO on a laptop interface.

Modify these parameters only if you set the network setup type to Network Installation.

The IP address of the ESU Launchpad Windows virtual machine used for communication with default gateway. It must be in the same subnet as the default gateway address.

If you use the same laptop to connect to ESXi or iLO, ensure that the Launchpad Windows IP for communication with ESXi is not the same as the IP configured for communication with ESXI or iLO on a laptop interface.

VLAN ID for communication with the UNS_APP interface and the NTP server.

If VLANs are not used in your system, leave the default value (0).

VLAN ID for communication with the MGMT network interface.

If VLANs are not used in your system, leave the default value (0).

• letters (a to z, A to Z)
• digits 0 to 9
• special characters: - (hyphen)

Domain suffix for all IMW virtual machines.

In the redundant configuration, the value of this parameter must be the same for both IMW installations.

For IMW deployed with Dimetra IP systems, type the following domain:

service.zone<x>, where <x> is the number of zone in the Dimetra IP zone zore to which IMW is logically assigned, for example service.zone1.

Digits 0-9

It is not recommended to use 0, but instead use 1 for the non-redundant or first redundant server, and 2 for the second redundant server.

Number assigned to the IMW system on one physical server that includes all the virtual machines (DNS, LB, PB, CAB, Identity Server, Database, IMW Core, AEs, and Messaging Server).

Datacenter ID is attached to the name of each virtual machine, as in core<IMW Instance ID><Logical IMW Instance><IMW Datacenter ID>, for example core1a-2, if Datacenter ID is set to 2.

This number is used by the DNS server to redirect the traffic to the correct IMW server, for example if IMW is deployed on two servers in the redundant configuration.

In the redundant configuration, each IMW server must have a different Datacenter ID, for example, the Datacenter ID on one server can be set to 1 and on the other to 2.

N/A

Do not change the default user name (Administrator).

Maximum 15 characters. Valid characters are letters (a to z, A to Z), digits 0 to 9, special characters: -

Hostname cannot consist entirely of numbers or contain spaces. The name also cannot contain the following special characters: / \ [ ] " : ; | < > + = , . ? * _

Maximum 15 characters. Valid characters are letters (a to z, A to Z), digits 0 to 9, special characters: . -

Domain name cannot consist entirely of numbers or contain spaces. The name also cannot contain the following special characters: / \ [ ] " : ; | < > + = , ? * _

The type of storage on which IMW will be installed. Depending on the configuration, your server may be equipped with local disks or it may be connected to an external storage device: Dot Hill 3520 (DAS).

Select DAS only if your system is equipped with external storage. Otherwise, select LOCAL.

2 to 63 characters. Valid characters are letters (a to z, A to Z), digits 0 to 9, special characters: -

Hostname cannot consist entirely of numbers or contain spaces. The name also cannot contain the following special characters: / \ [ ] " : ; | < > + = , . ? * _

The IP address of the NTP server set up on ESXi during installation from ESU Launchpad. The NTP server is the time source for all virtual machines on the server.

Arabic

English

Hebrew

Spanish

At least 14 characters long. Must contain characters from three of the following categories:

a–z

A–Z

0–9

!, $, #, %

Cannot contain the user account name or parts of the user full name that exceed two consecutive characters.

At least 14 characters long. Must contain characters from three of the following categories:

a–z

A–Z

0–9

!, $, #, %

Cannot contain the user account name or parts of the user full name that exceed two consecutive characters.

The password used for secure communication between redundant IMW servers.

The password must be the same on both IMW servers.

The deployment size affects the amount of operational memory that will be consumed by the Configuration Manager web server.

• Maximum Number of Users: 10,000
• Maximum Number of Devices: 10,000

• Maximum Number of Users: 10,000
• Maximum Number of Devices: 50,000

• Maximum Number of Users: 256,000
• Maximum Number of Devices: 143,000

MetersPerSecond

KilometersPerHour

MilesPerHour

At least 14 characters long. Must contain characters from the following categories:

a–z

A–Z

0–9

!, $, #, %

From 3 to 15 characters long. Must contain characters from the following categories:

a–z

A–Z

0–9

!, $, #, %

• standalone
• cluster-admin-console
• cluster-engine

• If you are installing Identity Server in a standalone configuration, select standalone.
• If you are installing the primary Identity Server machine in a redundant configuration, select cluster-admin-console.
• If you are installing the secondary Identity Server machine in a redundant configuration, select cluster-engine.

• If you are installing the cluster-admin-console, set this to the licensing server used by the secondary IMW.
• If you are installing the cluster-engine, set this to the licensing server used by the primary IMW.

Select Yes if you want to store the user credentials in the Common Address Book (CAB) virtual machine in your IMW.

• http://<password_website>
• https://<password_website>

Maximum 15 characters. Valid characters are letters (a to z, A to Z), digits 0 to 9, special characters: -

Password cannot consist entirely of numbers or contain spaces. The name also cannot contain the following special characters: / \ [ ] " : ; | < > + = , . ? * _

Maximum 15 characters. Valid characters are letters (a to z, A to Z), digits 0 to 9, special characters: -

Password cannot consist entirely of numbers or contain spaces. The name also cannot contain the following special characters: / \ [ ] " : ; | < > + = , . ? * _

Maximum 15 characters. Valid characters are letters (a to z, A to Z), digits 0 to 9, special characters: -

Password cannot consist entirely of numbers or contain spaces. The name also cannot contain the following special characters: / \ [ ] " : ; | < > + = , . ? * _

Maximum 15 characters. Valid characters are letters (a to z, A to Z), digits 0 to 9, special characters: -

Password cannot consist entirely of numbers or contain spaces. The name also cannot contain the following special characters: / \ [ ] " : ; | < > + = , . ? * _

At least 15 characters long. Must contain characters from the following categories:

a–z

A–Z

0–9

!, $, #, %

A new password for the local administrator of the application account for the following services: DS, Broker and Sync.

It is recommended to change in ESU the Directory Manager default password to a customer specific one during the system installation.

At least 15 characters long. Must contain characters from the following categories:

a–z

A–Z

0–9

!, $, #, %

A new password for the CAB Client configured on IDM.

It is recommended to change in ESU the Identity Service default password to a customer specific one during the system installation.

Provisioning Broker interface master IP address which provides information on the infrastructure organization.

In a redundant configuration, provide the IP address of the primary IMW system Provisioning Broker.

If your configuration is not redundant, this parameter is not required. Leave 0.0.0.0

Select the slave DNS type if you are configuring the other, geographically redundant IMW system.

The number of days for which the history of the location data will be stored.

The default value is 7 days.

The number of devices that will be reporting only location (not telemetry) data. The number in this field will be used to calculate the size of the Archive Writer database.

The default value is 2000.

60 / reporting time interval (seconds)

For example:

If the device is configured to report location every 30 seconds, then 60 / 30 = 2.

The value to be entered in this field is 2.

If the device is configured to report location every 120 seconds, then 60 / 120 = 0.5

The value to be entered in this field is 0.5.

The number will be used to calculate the size of the Archive Writer database.

The default value is 2.

60 / reporting time interval (seconds)

For example:

If the device is configured to report location (and telemetry) every 30 seconds, then 60 / 30 = 2.

The value to be entered in this field is 2.

If the device is configured to report location (and telemetry) every 120 seconds, then 60 / 120 = 0.5.

The value to be entered in this field is 0.5.

The number will be used to calculate the size of the Archive Writer database.

If the Backup Files Directory option is enabled, the location history is backed up at the selected hour.

The default value is 2.

If the Backup Files Directory option is enabled, the location history is backed up and deleted from the IMW database at the selected hour.

If the historical location data backup option is not used, the data is removed permanently from the IMW database at the selected hour.

The default value is 1.

The directory path for the location backup data. If the Backup Files Directory check box is selected, the history is removed from the IMW database when it exceeds the value defined in the Number of Historical Location Storage Days field and moved to the backup directory.

The backup directory cannot be located on local partitions used by the IMW applications to avoid taking up disk space required for correct IMW operation. The directory should be on an external or a network drive.

In the redundant configuration, provide a different directory for each server.

This options allows you to choose if you want to enable the OPerational Agent (OPA) on the IMW Core and use the backup and restore services provided by the Dimetra Enhanced Software Update (DESU) framework. Backup and restore is handled by Master Upgrade Install Servers (UISs) in the Dimetra IP zone core. OPA is responsible for the registration to the UISs and executing commands on IMW.

The cluster NAT IP address of UIS01 from the zone with lowest zone octet in cluster.

Enter the NAT IP to the following IP: 10.0.<CO>.67, where: <CO> is the cluster octet.

The option allows you to choose if you want to install the MotoMapping server on the IMW core virtual machine.

If Yes is selected, ensure that the MotoMapping .iso file is loaded into ESU Launchpad.

You can verify it and upload the file after the configuration is created on the Installation Player website in the Files Storage pane.

The user name used by the MotoMapping Client to connect to the MotoMapping database. The same user name must be provided during the MotoMapping Client installation.

The default user name is MMUser.

At least 14 characters long. Must contain characters from three of the following categories:

a–z

A–Z

0–9

!, $, #, %

Cannot contain the user account name or parts of the user full name that exceed two consecutive characters.

The type of supplemental configuration.

• UNS_SM_Full<version number>
• UNS_SM_Transparent<version number>

The files are available on the IMW Supplementals disk.

You can verify it and upload the file after the configuration is created on the Installation Player website in the Files Storage pane.